Choosing the right air conditioning solution for your facility

by Varun Godinho
0 comments

Daikin Australia’s national consulting sales manager Sunny Wong explains what to consider when determining sustainable air conditioning solutions for commercial spaces. 

What are the main things to account for when managing air conditioning in commercial settings? 

When it comes to getting the most out of your air conditioning setup, it’s all about finding the right balance between comfort, energy efficiency, cost and maintenance. 

Opt for energy-efficient systems like Variable Refrigerant Volume (VRV), chillers or commercial-grade units that are built for performance and reliability, designed to suit the specific application. Make sure the temperature stays consistent throughout the space and does not create hot or cold spots. Ideally, try to keep it within that sweet spot of 22 to 24 degrees Celsius. Good ductwork design with proper vent placement and accurate temperature sensing location makes a big difference in keeping things cool and even. 

Building Management Systems (BMS) or a manufacturer’s central controller help with real-time monitoring and give you centralised control. 

Do not neglect maintenance. Remember to keep up with filter changes, coil cleaning and inspections to prevent downtime.

What mistakes do you see commercial setups make most often with their air conditioning? 

When managing air conditioning systems, a few common slip-ups can really drive up costs, reduce comfort and shorten equipment lifespan. The common ones to watch out for are skipping maintenance, neglecting heating and cooling characters, time schedule and temperature control.

Running AC systems at full capacity regardless of occupancy or time will cause unnecessary energy use. We often see air conditioners running during after-hours or when the area is not occupied. 

Sometimes, with thermostats installed in direct sunlight or not in the occupant zone, inaccurate temperatures are sent back to the controller and the air conditioner either operates too cold or too hot, and occupants are not comfortable with the temperature setting.

Sunny Wong

Sunny Wong

What are energy-efficient solutions to maintain air comfort in commercial spaces? 

If you’re looking to keep commercial spaces comfortable without wasting unnecessary energy, there are a few smart, energy-efficient strategies you can rely on.

Position the manufacturer’s proprietary temperature sensor with a third-party intelligent sensor at the ideal location(s) in the occupant space, combined with BMS controls. These tools help to automate heating, cooling and ventilation by adjusting to real-time conditions like occupancy, weather and time of day. It improves energy efficiency and system performance, as well as enables remote monitoring and control.

On top of this, choose energy-efficient equipment like systems with high Seasonal Energy Efficiency Ratio (SEER) or Energy Efficiency Ratio (EER) ratings, which deliver the same cooling with less energy use.

A Heat Recovery Ventilator (HRV) helps to pre-condition the incoming fresh air, lighten the load of the HVAC system and improve indoor air quality.

Set and schedule temperatures correctly. Managing set points (using a BMS or manufacturer’s central controller) and using scheduled operations keep heating and cooling efficient and avoid unnecessary manual adjustments.

Lastly, stay on top of maintenance to keep systems running smoothly, maintain efficiency and help avoid costly breakdowns.

Many facility managers are chasing sustainable and energy-efficient solutions. How can they achieve that? 

There are plenty of ways commercial spaces can run their air conditioning more sustainably and reduce their environmental footprint, such as switching to low-Global Warming Potential (GWP) refrigerants, using renewable energy and adopting smart controls with BMS or IoT sensors.

Traditional refrigerants like R-22 or R-410A have a high global warming potential. Switching to refrigerants with a lower GWP, such as R-32, is more environmentally friendly.

Complementing HVAC energy requirements with solar photovoltaic (PV) is a great way to lower carbon emissions and make cooling systems more sustainable.

Installing Energy Recovery Ventilators (ERVs) or HRVs reuses heat from outgoing air to pre-condition incoming air. It’s a smart way to save energy, especially in large spaces that need constant ventilation.

Adopting smart controls with BMS or IoT sensors allows HVAC systems to adjust automatically based on real-time occupancy, indoor air quality and deliver comfort where it’s needed without wasting energy.

Upgrading to high-efficiency HVAC units [will result in the] newer systems using less energy while delivering better performance. 

How do you see air conditioning adapting and evolving as temperatures continue to climb and technological innovation, such as wireless control and IoT-enabled systems, further develops? 

As global temperatures rise, technological innovations are evolving to meet our needs in three key areas.

The first is sustainable solutions. We’re seeing more systems use low-GWP refrigerants and become more energy-efficient.

The second is adaptive controls. New, smarter controls and IoT sensors can automatically adjust set point temperature settings and direct airflow where it’s really needed. Plus, better ventilation and filtration options are improving indoor air quality.

The third is AI-led energy management, where air conditioning is becoming smarter – responding not just to cooling and heating demands but also optimising energy efficiency and reducing a building’s carbon footprint. 

Read more: Daikin enters data centre market with DDC Solutions acquisition

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More