As a signatory to the Paris Agreement, Australia has clear obligations to maintain the global average temperature to well below 2°C above pre-industrial levels and pursue efforts to keep warming to less than 1.5°C.
Australia’s Climate Change Act requires a 43 percent emissions reduction by 2030 and net-zero emissions by 2050.
One of the indispensable ways the country will hit its targets is to focus on emerging Carbon Capture, Utilisation and Storage (CCUS) technologies.
While parallel efforts focus on generating fewer emissions at source, it is equally important to develop carbon capture techniques that remove emissions generated.
These carbon management techniques are generally spread across three areas: Carbon Dioxide Removal (CDR) that pulls CO2 from the air and stores it either in the ocean, land surface or below ground; Carbon Capture and Storage (CCS) to capture CO2 at the source of its emission and store it underground; and Carbon Capture and Use (CCU), which captures CO2 and then uses it in the creation of products like building materials or fuels.
One startup that aims to pioneer low-cost, scalable and mobile CCU technology in Australia is Kapture. Its founder and CEO, Melbourne-based Raj Bagri (pictured above), doesn’t have the conventional dyed-in-the-wool engineering or scientific background that you’d typically expect from someone working in this field.
Instead, Bagri quit her corporate job a few years ago to enter the hospitality sector and open a few restaurants in Melbourne’s CBD. She then sold that business and became an angel investor in startups. Later, she worked on building a baby formula company and joined a technology company where she worked closely with engineers and scientists.
Carbon capture is a topic that cropped up in the news headlines around 2020, and it’s an area that piqued Bagri’s entrepreneurial and business acumen as a potential billion-dollar business.
Her lack of a technical background in CCU wasn’t about to dampen her desire to work in the field. “I think when you really want to solve a problem, you can go and learn anything, and it’s just all about how much you want to solve that problem. There are engineers who have been to university and they are probably not capable of doing what I’m doing. It’s only because I was so passionate and driven to go and solve this problem,” Bagri says.
The development process
Bagri’s lack of a formal background in the field turned out to be an advantage, allowing her to challenge some of the blinkered approaches that a few from the scientific community adopted.
“Engineers like to build really complicated things that actually can’t be commercialised or turned into a real product. I thought, what if I could develop carbon capture technology that can be scaled at mass? Every news headline was about carbon capture’s high capital expenditure, toxic chemicals and issues with storing CO2 underground. I thought of a new way to look at carbon capture.”
She dived into a two-year R&D discovery process to develop the core concept for the capture technology. Then, with the help of engineers, she built the startup’s first prototype, which was then turned into a real product.
Bagri and her team have developed a technology that captures CO2 at the source – say from a diesel generator – and can then convert it into a solid form. That solid form of stored carbon can have various uses, especially in the construction of infrastructure.
Following a commercial pilot at the start of this year in which the company captured about five tonnes of CO2 from a 30 KVA diesel generator and converted it into a solid form, Kapture signed an agreement with concrete manufacturer PERMAcast to permanently store CO2 in Western Australia’s concrete infrastructure.
“They happened to be looking for low-carbon concrete products,” Bagri recalls. “For a startup, it’s better to work with a midsize company because you can move much faster than working with a global company. Because our technology has huge potential in Western Australia, we were looking for a partner in WA that can help sequester the CO2.”
PERMAcast says the embedded CO2 is not released back into the environment, even in the event of a demolition.
Kapture’s partnership with PERMAcast demonstrates a clear demand for the products created through this technology. “They’ve developed a concrete mix that works really well,” Bagri says. “It’s a lower-carbon concrete mix, and they’re about to commercialise that mix.”
“We are about to sequester our CO2 into a high-profile job in WA. They’ve also identified a very big gap in the market where our byproduct can go into, and there’s a huge pathway to scale that.”
While the demand for the byproducts is climbing, Kapture is now on a mission to scale the technology itself that will allow it to generate sequestered carbon at scale. A key partner in that endeavour is Horizon Power.
“The Horizon Power partnership came through one of our angel investors,” Bagri explains. “They [Horizon Power] were basically looking at different ways to decarbonise their power generation fleet.”
Kapture’s technology involves low-cost hardware components that retrofit the exhausts of commercial-sized generators running on diesel or biodiesel. As Bagri explains, facility managers could quite easily plug the hardware directly into the building’s HVAC system to capture carbon emissions directly from there.
While most carbon capture technologies focus on large-scale emitters such as coal-fired power plants, Kapture’s technology can be fitted onto smaller emitters like generators.
During the trial with Horizon Power, the two companies measured the impact of the technology on genset performance and the efficiency of the carbon capture, utilising a standalone power system (SPS) generator.
“They [Horizon Power] were very interested in what we are working on,” Bagri says. “The initial trials were really for us to demonstrate our technology. They wanted to look at how our technology can support their decarbonisation pathway, and also give us feedback as we complete product development on our technology to make it suitable for real life.”
The race to decarbonise
There have been a mix of public and private initiatives aimed at developing carbon capture technologies in Australia.
Two years ago, the government launched a $65 million Carbon Capture Technologies Program, funding seven emerging projects working on technologies such as direct air capture and mineral carbonisation to decarbonise hard-to-abate industrial processes and directly remove carbon dioxide from the atmosphere.
It included million-dollar-plus grants to the likes of Calix to produce methanol from carbon dioxide released during cement production.
Other recipients were Novalith Technologies to demonstrate the production of battery-grade lithium carbonate from carbon dioxide captured directly from the atmosphere, and also the University of Melbourne to trial the conversion of carbon dioxide captured from the atmosphere into travertine, a carbonate rock.
Last year, in what is believed to be a world-first initiative, Canadian startup Arca began piloting its carbon mineralisation technology at BHP’s Mount Keith Nickel West Mine in Western Australia to enable gigatonne-scale passive CO2 capture. The site’s mine tailings possess large amounts of ultramafic rock containing magnesium. This mineral naturally reacts with carbon dioxide in the air to form solid crystals in a process called carbon mineralisation, and therefore removes carbon dioxide from the atmosphere. Arca’s technology accelerates the natural carbon capture and storage process.
Last year, energy giant Santos opened the nation’s first large scale onshore carbon capture and storage project at Moomba in the Cooper Basin. Within months of its opening, the facility is reported to have already buried 340,000 tonnes of CO2 underground and aims to store up to 1.7 million tonnes each year – the equivalent of taking 700,000 cars off the road.
One of the key advantages of Kapture’s technology, Bagri explains, is that it doesn’t rely on expensive liquid storage of the captured CO2, which she says can cost up to US$450 for a tonne.
“Our hardware is low-cost. We don’t do liquid CO2 storage. We have a byproduct that can be sequestered,” Bagri says.
While carbon offsets are often criticised by activists as a get-out-of-jail-free card for tier one corporates, enabling them to remain large emitters while buying their way out of the problem, Bagri says genuine adoption of carbon capture will only happen if the solutions are cost-effective.
While she refrains from giving a specific cost involved with Kapture’s CO2 capture technology, she adds that it is still under development and can possibly be further reduced from current levels. “Customers are not willing to pay a high premium to reduce their emissions. The technology needs to be affordable and very similar to the cost of carbon credits.”
The way forward
Bagri says that while she’s spearheading the company, it’s a village that’s driving the startup. The advisory board includes the likes of Glenn Platt, who has driven Australia’s energy transition and has a deep understanding of commercialising technology; Darren R. Hedley, the CEO of PERMAcast, who brings nearly four decades of experience to the table and has a background in supply chain and logistics across maritime, oil and gas sectors; and Rebecca Stringer-Krein, a former chief financial officer of Zenith Energy Limited, which listed on the ASX under her watch.
“We are about to raise $2 million,” Bagri says. “That will be used to scale up our team and also build a commercially viable unit. We are a lean company, so we don’t like to overhire or burn cash.”
She notes that Kapture’s technology won’t be bogged down by lengthy R&D trials or commercially unviable technologies. “It’s ready to go in 2026 and it’s economically viable. We’re searching for more field trial customers. We have actually signed a letter of intent with a diesel generator OEM,” Bagri says, with the further field trials to form the basis for early commercialisation of Kapture’s technology.
“In three years, we will hopefully have scaled in Australia, and we should be starting international [expansion]. In five years’ time, we should be a billion-dollar company.”
This story originally appeared in the October 2025 edition of FM Magazine. To download the full edition, click here.
Read more: New technology allows for permanent CO2 capture in WA’s concrete infrastructure
